TEAMGROUP VULCAN DDR5 LAPTOP MEMORY BLACK 32GB(1x32GB) 5200MHz CL38 FLBD532G5200HC38-S01 özellikleri ve fiyatları

TEAMGROUP VULCAN DDR5 LAPTOP MEMORY BLACK 32GB(1x32GB) 5200MHz CL38 FLBD532G5200HC38-S01 teknik özellikleri

Model kodu

FLBD532G5200HC38-S01

part Number

FLBD532G5200HC38-S01

RAM kapasitesi

32 GB

module Count

1

module Capacity

32

RAM türü

DDR5

cas Latency

38

memory Voltage

1.1

memory Compatibility

Intel 13th Laptop

memory Form Factor

SO-DIMM

pin Count

262

Bellekte hata düzeltme (ECC)

Yok

Bellek tamponlama türü

Unbuffered

Bellek hızı ve uyumluluk koşulları

Manufacturer Frequency label: 5200MHz; The final operating frequency of the memory depends on system BIOS settings, and motherboard and CPU compatibility.

Boyutlar

30(H) x 70(L) x 3.7(W)mm

Boy

30 mm

En

70 mm

device Depth

3.7

operating Temperature

0°C ~ 85°C

storage Temperature

-20°C ~ 65°C

Garanti

Lifetime warranty

heat Spreader

Graphene-metal composite

Üreticinin ayrıntılı teknik bilgileri

Module Type: VULCAN DDR5 LAPTOP MEMORY, Capacity: 32GB(1x32GB), Frequency: 5200MHz, Latency: CL38, Data Transfer Bandwidth: 41600 MB/s, Voltage: 1.1V, Compatibility: Intel 13th Laptop, TEAM P/N: FLBD532G5200HC38-S01, Dimensions: 30(H) x 70(L) x 3.7(W)mm, Heat Sink: Graphene-metal composite, Operating Temperature: 0°C ~ 85°C, Storage Temperature: -20°C ~ 65°C, Warranty: Lifetime warranty

technical Details Continued

Faster game launch and loading, Ultra-thin graphene heat sink for enhanced heat dissipation, Improvement of the battery life of gaming laptops, Upgrade capacity for effortless gaming experiences, Power management IC chip and On-die ECC error-correction mechanism, Rigorously selected high-quality IC of stability and reliability, Lifetime warranty to offer gamers peace of mind, For a complete list of compatible platforms, please refer to the "Compatibility Inquiry" section., Before purchasing memory products, please check the QVL (Qualified Vendor List) compatibility list provided by the motherboard manufacturer., Do not mix memory modules of different capacities, frequencies, brands, or models. Each memory kit is paired through compatibility testing. Mixing different kits may cause system instability or failure to boot., The quality of the CPU memory controller (IMC) and the version from the BIOS of motherboard may both potentially affect the operating frequency of the memory., The final operating frequency of the memory depends on system BIOS settings, and motherboard and CPU compatibility., If XMP 3.0 (Intel) or EXPO (AMD) is not enabled, the memory will run at the SPD default frequency (JEDEC standard), such as DDR5-4800 (or lower). This is a normal phenomenon and not a product defect., XMP 3.0 / EXPO must be manually enabled by the user. Some motherboards may not reach the stated frequency, as the final operating frequency depends on system settings., Overclocking (such as enabling XMP 3.0 / EXPO settings) is not part of the JEDEC standard and may affect system stability. If overclocking causes system instability, please revert to the BIOS default settings., The stated frequency of the memory module is the maximum achievable frequency. However, not all systems will be able to reach it., Ensure that your motherboard and processor support the corresponding overclocking technologies (XMP 3.0 / EXPO); otherwise, the memory may not reach the advertised overclocking frequency., TEAMGROUP memory modules are tested under normal voltage conditions. If there are any issues related to processor or motherboard malfunctions, please contact the respective after-sales service of the processor or motherboard manufacturer., TEAMGROUP memory modules are designed for desktop or laptop computers that support DDR5 DRAM (depending on the product model). However, final compatibility is determined by the motherboard, processor (CPU), and BIOS support., The final operating frequency of the memory depends on system BIOS settings, and motherboard and CPU compatibility. For example, even if you purchase a DDR5-6000 memory, if the motherboard or CPU only supports DDR5-5600, the memory will not exceed that frequency., Before purchasing, please confirm whether your motherboard, processor (CPU), and BIOS support the memory specifications you intend to buy., Some older Intel/AMD chipset may not support newer interface memory modules. Before purchasing, please refer to the motherboard and processor (CPU) specifications or consult the manufacturer for confirmation., If XMP 3.0 (Intel) or EXPO (AMD) is not enabled, the memory will run at the SPD default frequency (JEDEC standard), such as DDR5-4800 (or lower). This is a normal phenomenon and not a product defect., It is recommended to update your motherboard BIOS before installing the memory to ensure optimal compatibility and performance., The final operating frequency of the memory depends on system BIOS settings, and motherboard and CPU compatibility., If XMP 3.0 (Intel) or EXPO (AMD) is not enabled, the memory will run at the SPD default frequency (JEDEC standard), such as DDR5-4800 (or lower). This is a normal phenomenon and not a product defect., XMP 3.0 / EXPO must be manually enabled by the user. Some motherboards may not reach the stated frequency, as the final operating frequency depends on system settings and hardware specifications., Overclocking (such as enabling XMP 3.0 / EXPO settings) is not part of the JEDEC standard and may affect system stability. If overclocking causes system instability, please revert to the BIOS default settings., The stated frequency of the memory module is the maximum achievable frequency. However, not all systems will be able to reach it., If the memory cannot achieve the advertised frequency due to motherboard, processor, or BIOS limitations, this should not be considered a product defect and does not qualify for warranty claims., TEAMGROUP memory modules are tested under standard voltage conditions. If you experience issues due to processor or motherboard failure, please contact the respective processor or motherboard manufacturer for after-sales support., Enabling XMP 3.0 / EXPO is considered overclocking. The final operating frequency and stability depend on the motherboard, CPU, and BIOS settings. Not all systems can achieve the advertised speeds. This is a normal phenomenon and not a product defect., Overclocking may cause system instability or crashes. If such issues occur, please revert to the BIOS default settings and manually adjust to the optimal configuration., Some motherboards may require BIOS updates and optimizations to ensure stable operation., If the memory's clock speed, voltage, or timings are set beyond the official specifications (JEDEC / XMP 3.0 / EXPO), it may result in system instability or damage. TEAMGROUP is not responsible for such issues, and warranty scope coverage may be affected., The warranty covers only material and manufacturing defects under normal use. It does not cover damage caused by overclocking, incorrect BIOS settings, voltage adjustments, environmental factors (such as high temperature, high humidity, electrostatic discharge), or incompatible hardware configurations., The advertised frequency of the memory module is not a guaranteed value. TEAMGROUP is not responsible if the memory cannot reach the advertised frequency due to system compatibility issues, and such cases do not qualify for warranty claims., If you encounter any compatibility or installation issues, please contact TEAMGROUP technical support for professional advice., Before purchasing, please make sure that your motherboard, processor (CPU), and BIOS support the memory module you are buying to avoid incompatibility issues., Do not mix memory modules of different capacities, frequencies, brands, or models. Each memory kit is paired through compatibility testing. Mixing different kits may cause system instability or failure to boot., The quality of the CPU memory controller (IMC) and the version from the BIOS of motherboard may both potentially affect the operating frequency of the memory., If the system fails to boot, runs unstably, or does not achieve the advertised frequency, ensure that the BIOS is updated and that XMP 3.0 / EXPO is manually enabled., Different memory brands may have variations in internal timing, which could affect compatibility. To ensure system stability, it is not recommended to mix different brands or specifications of memory modules., We reserve the right to modify product specifications without prior notice., The recommended operating temperature range for this product is 0°C to 85°C, and the recommended storage temperature range is -20°C to 65°C., The actual maximum temperature tolerance varies depending on the IC grade and module design of each specific part number. For long-term operation in extreme environments, please contact our technical support team for further evaluation and recommendations. Operation outside the recommended temperature ranges may affect product lifespan and data reliability and is not covered under standard warranty conditions.

Güncel mağaza teklifleri

Son 48 saat içinde doğrulanmış, stokta mağaza teklifi yok. Eski fiyatlar güncel teklif olarak gösterilmez.